г. Москва,
Нижегородская ул., д. 70, корп. 2
Новоостаповская ул., д. 5, стр. 2
тел: +7 (499) 110-07-29
e-mail: info@radprom.ru
Смотреть на карте
энергоэффективность и приборы
неразрушающего контроля
в нефтегазовой отрасли
RU EN
Наши услуги
Коротко о нас

Мы динамично развивающаяся компания по предоставлению услуг обработке металла и разработке приборов контроля.

15.07.15 Сайт запущен! Дорогие посетители, теперь Вы также можете ознакомиться с услугами нашей компании и в интернете, на нашем сайте. Маргарет Тэтчер Инженер - это человек, который может объяснить, как работает то или иное устройство, но не может объяснить, почему оно не работает.

Waste recycling problems

At present, all over the world during one of the most important areas of development is the implementation of effective waste management technologies.
There are many methods of waste disposal, has its pluses and minuses.
One of the most effective ways is considered plasma pyrolysis waste treatment, followed by generation of useful products: electrical and thermal energy, hydrocarbon raw materials, building materials.

The innovative technology of plasma gasification

Processing is performed by using plasma chemical technology, which is a kind of high-temperature pyrolysis techniques (gasification)
The technology tested on the world market, suitable for replication in future
A key advantage of plasma gasification as compared with the conventional used today gasification is much higher temperature range: up to 5000 degrees, which makes the technology environmentally friendly and virtually waste-free.

Comparative analysis of the waste management practices

Plasma gasification Conventional gasification Burning
Complete destruction of 90% destruction (800 C) 70% destruction (650C)
No tar, dioxins and furans There are resin, furans and dioxins Many resins, dioxins and furans
Only 5% of the inorganic vitrified compound 10% ash 30% of toxic ash
Any kind of waste Besides individual inorganic species Besides individual inorganic species
You do not need sorting It requires sorting It requires sorting
Large volume Small volume Large volume
No gas emissions, there is no fly ash Average flue gases and fly ash High flue gases and fly ash
Not sensitive to humidity Sensitive to humidity Sensitive to humidity

The content of the project

Construction of the plant for plasma pyrolysis processing of waste wood.
The plant's capacity is 1,500 kg of recyclable waste per hour, up to 11 ths. Tons per year.
Power for electric power generation - up to 6 MW, useful to develop a minimum of 4 MW.
Floor space - 400 square meters. m.

Waste recycling technology

Generation of electricity

  • Rated power: 1500 kW
  • Engine Type: 4-stroke, gas piston, V-twin with a turbocharged, charge air-cooled, spark-ignition
  • The inlet gas pressure: 50 mbar
  • Specific fuel consumption at rated speed: 0.22 Nm3 / kWh
  • Weight (dry): 27600 kg
  • Dimensions: 6635 x 2430 x 3116 mm (LxWxH)
  • Designated Overhaul: 90 000 h
  • Terms of Use:
- The external air temperature:
from -50 to +50 ° C
- Relative humidity at 25 ° C: 98%

Gas piston installation (gas power plant) with a capacity of 1.5 MW, 5 pcs

Project economy

The total cost of the plant for the project is 5.7 mln. Rubles in June 2016 prices., Including design and installation supervision
In processing 1500 kg / hour of waste wood is generated 1700 Nm³ / hour of synthesis gas.
Power generation: 1700 Nm³ x 4 = 6800 KW / h
Own power consumption: 1 000 KW / hour
Electricity supply to the network: 5800 kWh /
Staff: 16 people
Source plasma reactor equipment to overhaul 86 000 hours
Warranty period: 12 months from the commencement of operation


Контакты
г. Москва,
Нижегородская ул., д. 70, корп. 2
Новоостаповская ул., д. 5, стр. 2
тел: +7 (499) 110-07-29
e-mail: info@radprom.ru
© ООО «НТБ «Радтехпроект», 2019
Яндекс.Метрика Создание сайтов, дизайн, обработка фото
Социальные сети